Metal Lube 4 Cycles for Motorcycles

Metal Lube 4 Cycles for Motorcycles the highest Specific Power (CV / cc) of the bikes, the specific requirements of the clutch discs and the high loads that occur between the teeth of the gears in the increasingly compact gearboxes, they force oil to withstand greater efforts than those made in the automobile.

This formulation is designed for this type of engines, where the treatment has to guarantee the maximum reliability of the engine and the best mechanical response of the gearbox, at the same time, in the clutch no skids occur between the discs, in order that they transmit the power efficiently, gradually and without overheating.

Metal Lube 4 Cycles for Motorcycles drastically reduces friction, wear, heat, noise and vibration of the engine, it will improve engine response and acceleration, it will also reduce fuel and oil consumption.

INSTRUCTIONS:
Add METAL LUBE to the engine oil pan, it is not necessary to remove oil. It can be used with new or used oil. Engines with up to 4 liters of oil, put a full container of 120 ml. (4 oz.), With up to 2 liters of oil put the 60 ml. Pack, motors with less oil capacity, mix 30 ml. for each liter of oil.

Engines of Competition: Repeat the application every 3 oil changes.

Street engines: every 31,000 miles or 1,000 hours.

This formulation can be used both in clutch engines bathed in oil, and dry.

PACKAGING:
120 ml (4 oz) and 60 ml.