Metal Lube Formula Manual Transmissions, Differentials and Gears The gearbox and the differentials are one of the most important elements of the automobile and the ones forgotten by the users. The inaccessible results and the difficulty of checking oil levels make these elements susceptible to damage due to overheating, lack of oil, or simply due to careless maintenance.  The lubrication inside the box and the differential, is given by bubbling, when the oil is cold, the viscosity is very high, offers a lot of resistance to movement and influences the hardness of the change in the manual boxes and the upper parts of the box of changes do not receive lubrication, this generates a great wear in the piñoneria. On the contrary when the oil is heated in excess, by the effect of centrifugal force and heat, the oil is separated from the pinions and the metal-metal contact is inevitable.  |
Metal Lube Formula Manual Transmissions, Differentials and Gears minimizes friction and wear, the lubricity of the gears will be maintained even at temperatures below zero and the lubricating film will remain adhered between the teeth of the pinions even when they work subjected to high pressure and very high revolutions. Well-lubricated transmissions and differentials will allow the full power of the engine to be used while the vehicle is traveling at different speeds. METAL LUBE guarantees the best response of transmissions, differentials, gears, reducers and other transmission organs. It facilitates the slides to allow a fast and precise synchronization. Reduces the resistance of the oil to the movement of the gears. Improves cold running and keeps the viscosity of the hot lubricant stable. The METAL LUBE treatment is able to withstand high loads and extreme shear stresses. It reduces the excess temperature generated by friction, it cools the mechanisms, taking into account that in these equipment, the crankcase is compact, with very little oil capacity and there is no cooling circuit. By maintaining a suitable temperature in the oil, it is possible to avoid its oxidation and the premature exhaustion of the additives that compose it, so that the oil will maintain its properties for much longer. With this formulation abrasive, adhesive, corrosive and friction wear is avoided. METAL LUBE anti-friction treatment is able to improve the lubricity of any oil more than 500%. Its powerful antifriction action reduces noise and vibrations. MOST FREQUENTLY USED USES: APPLICATION AND DOSAGE: REPETITION: CAUTION: It is very common for manual changes to use ATF type oils (automatic transmissions oil), if this is the case, use the Automatic Transmissions formula to replace the Manual Transmissions and Gears Formula. |
