Metal Lube Treatment for the Fuel System: Gasoline

In the injectors, the generation of dirt, concentration of varnish and deposits of coal is very frequent; The most common problems are the blockage of the needle and the dirt in the nozzle seat, the obstruction of the holes and loss of pressure restrict the opening and the flow of fuel.

Metal Lube Treatment for the fuel system: Gasoline

Metal Lube Treatment for the fuel system: Gasoline cleans and keeps the entire fuel system clean, leaves a treatment on valve seats, injectors, combustion chambers, piston and cylinder heads, preventing the accumulation of debris and protecting them against wear.

With only one application of this treatment, the fuel efficiency and acceleration is IMPROVED, the whole fuel system is CLEARED, the power is RESTORED, CO2 emissions are REDUCED, corrosion is AVOIDED, and fuel is ECONOMIZED.

DOES NOT ALTER THE OCTANAJE IN THE GASOLINE * DOES NOT DAMAGE THE CATALYST OR THE TURBO.
 

INSTRUCTIONS:
For use in: In all types of gasoline engines.
A container of 236 ml. in a 78-liter tank every 8,000 km / 5,000 miles.
In small tanks: Mix 3 ml. for each liter of gasoline until the content of the 236 ml container is finished. Repeat every 8,000 km / 5,000 miles.
Recommended Pre. ITV: Use it before passing the ITV, it will help you reduce CO2 emissions.
Directions:                                                                                                                                                                                                                                                                                        Pour the treatment first into the tank and then the fuel to facilitate its homogeneous mixing.
 

NOTE:
In motorcycle engines, use the specific formula for them.