Metal Lube for engines

Metal Lube for engines contains an advanced formula that is compatible with all types of engines. It provides extraordinary protection against friction and wear of all seasons and climates from different parts of the world. It improves the start of the engine of a cold state and protects it against wear in crucial situations: short trips, high temperatures, failures in the lubrication system and others.

Metal Lube improves the power of the engine, provides balance of the compression between cylinders, significantly reduces the noise and vibration of the same. Helps to avoid more severe wear problems of valve springs and rocker arms (rocker arms and valve springs).

Increases the performance and durability of the treated parts, allows a motor to work even longer when it loses oil or pressure. Drastically reduces up to 95% of friction between parts, this results in lower fuel and oil consumption.
The temperature of the engine, engine oil and radiator or coolant water will be reduced considerably, while avoiding the risk of extreme pressures on the engine and its cooling circuit. In engines equipped with turbo turbines keeps the consistency of the oil in all parts of the engine, prevents the oil from being carbonized by high temperatures in the turbo shaft.

By optimizing engine functions, Metal Lube reduces emissions of polluting gases, protects and lengthens the life of the catalyst and oil filter. It helps prevent premature oxidation of motor oil and keeps its properties stable for a longer time, even in engines equipped with EGR (Exhaust Gas Recirculation) systems.
A single METAL LUBE application is effective 62,000 miles. Metal Lube is not lost with oil changes, it can be used with new or used oil. Metal Lube for engines does not generate layers of material inside the engine, it can be used in completely new engines, although we recommend putting it after the first 5,000km (3,107 miles approx.). so that the engine has the first initial wear necessary for a good adaptation.

MOST FREQUENTLY USED USES:
For use in all types of engines: gasoline, diesel, gasoline and gas hybrid, etc.

APPLICATION AND DOSAGE:
Add the contents of the container (236 ml) to the engine oil pan. It is not necessary to remove oil. It can be used with new or used oil. • A 236 ml container is sufficient for engines that use up to 8 liters of oil, regardless of engine displacement.

Repeat the application every 62,000 miles or 2,000 hours of work. METAL LUBE, is not an oil additive, it is not lost with the oil change, because it treats the metal, not the oil. Compatible with mineral and synthetic oil. You can use it in engines equipped with catalytic converter or particle filter.

* METAL LUBE does not repair mechanical failures

NOTE:
For 4-stroke motorcycle engines with oil-filled clutches, use the FORMULA Metal Lube 4 Cycles for Motorcycles. The characteristics and effectiveness of this formulation are the same as the Motors formula, but with the quality of not affecting clutch discs bathed in oil.